Chemical Mortar CM410EASF - Tropical

 
Chemical Mortar CM410EASF - Tropical
 
Description
The chemical capsule CCS - V is a high performance rapid cure spin-in chemical anchor system based on optimum measured proportions of high strength vinylester resin, hard - ener and quartz aggregate sealed in a glass capsule. It is a fast install, simple to use system requiring no special tools and provides high strength stress free anchoring in concrete and solid masonry. The system operates by spinning a chisel ended anchor stud using the required drive adaptor through the capsule using a rotary hammer drill which crushes and mixes the contents in the drill hole and initiates the curing process, the stud is left in position to fully cure and form a high strength bond which is stronger than the base material. Capsule sizes are drill hole specific from M8 to M30 diameters. The system can be used with longer than standard threaded bars combined with multiple down hole capsules, studs should be cut chisel ended and separate drive adapters are available for connection to a drilling machine.
 
Advantages
  • Rapid cure.
  • Consistent load behavior.
  • Suitable for static and dynamic loading.
  • Fast and simple to install.
  • Vibration resistant.
  • Imparts no expansion stresses on the base material.
  • European Technical Approval (Option 8).
  • Drill hole cleanliness not as critical as injection systems.
  • High-performance resin guarantees high loads in the base material.
  • The resin anchoring is free of expansion forces and permits low axial spacings and edge distances.
  • Flush nish, no projecting bolt after dismantling the xture.
Advice
 
Larger anchoring depths are possible with the use of more than one capsule.
Base materials
 
The system is designed for static and dynamic heavy duty anchoring of anchor studs into vertical and horizontal drill holes in reinforced and non-reinforced concrete, solid masonry, rock and stone.
 
Application
 
Primarily used where anchor consistency is required and injection resin use would be prohibitive or inconvenient. Due to the viscous nature chemical capsule CCS - V is not suitable for perforated and hollow substrates.
 

 
 
Contact Us
INDO-SPARK CONSTRUCTION
SERVICES
Pune Address :
Chandralok Housing Society, " Mangal Murti ", 686 / C / 2, Near Bata Show Room and Chandralok Hospital Lane, Bibvewadi, Pune - 37, Maharashtra, India.
Tel. No. : +91 - 20 - 24224537

Mobile : +91 - 98231 96066
              +91 - 98233 44299

 
Branch Offices : Odisha, Kolkata
 
Head Office Address :
198 E, Tararani Chowk, Near Geeta
Mandir,  Kolhapur - 416 003  ,
Maharashtra, India
Tel. No. : +91 - 231 -  2663581
Telefax : +91 - 231 -  6681005
Mobile : +91 - 98231 92194
Email :
Visit Also :